Our children are precious to us as a parent or caregiver we need to always ensure we do everything to protect them. Few people think of a park as a possibly dangerous location but annually over 200,000 children are hurt in park accidents. 70 percent of these injuries are due to kids falling from the playground into the surface under. Not many playgrounds are as secure as they need to be and the design of this playgrounds is generally one of the primary contributing issues. Appropriate playground mats and park tiles may significantly lower the accidents resulting form these drops.
What’s 토토사이트 surfacing significant? A number of the gear could be anywhere from 6′ to 10′ and most of us know how much children like to climb. A good deal of head injuries and wounded limbs may happen when a child drops out of these heights. The peaks are in fact called critical fall heights. The IPEMA, International Playground Equipment Manufactures Association, sets criteria on what the depth of the surface of the park should be by assessing the critical fall heights.
Critical drop height of a park is based upon the elevation of the tallest item of gear that a kid can endure. This elevation will determine the depth or affect attenuation a playground must possess as explained in ASTM F1292.
Sand isn’t a recommended surface for many reasons. One is the children playing it readily remove the sand out of the desired area. If it becomes wet and packs it down is often very difficult to fall on also. Sand may also get in children’s eyes and cause irritation.
Wood mulch or fill is frequently used but this procedure requires continuous care to maintain the mulch at the drama area and has to be raked to stop low spots. After a very low place happens, any security cushion the mulch supplies is significantly reduced. Rubber mulch and pellets are somewhat better but also need continuous maintenance to prevent harmful bald or low spots.
A safe substance that’s suggested for playground safety surfacing now is rubberized playground mats and mats. You can get plastic tiles and mats from 1″ to 4 1/4″ in depth. Based upon the tallest height that’s from the playground is how thick the mat or tile should be. These tiles and mats not only look good but most significantly they could greatly cut back on the amount of park fall accidents and protect those precious little ones.
So spend some time and start looking into using plastic tiles and mats now for the playground safety design needs. Whether your park reaches a college, church, day care center, and playground, or at even in your own backyard, it’s best to have the suitable park rubber mats and tiles for cushioning.